Engineered Flooring
We offer high quality Engineered flooring, consisting of two layers. When compared to solid, engineered flooring is less sensitivity to humidity fluctuations in room air and subfloor. It ensures more stablity and less risk of shrinking and cupping. Due to this, engineered flooring is suitable for installation directly on concrete subfloors, including subfloors with underfloor heating systems.
Construction
Consists of two layers- birch plywood base layer (9 - 12 mm) and oak or ash top layer (3 - 4 mm). The top layer is made from a single hardwood lamella. We do not offer 3-strip flooring, in which the top layer is produced from many smaller pieces. After installation, it is visually impossible to tell difference between solid flooring and engineered flooring.
Sizes
Thickness 12 or 16 mm, widths 165, 180, 210, 240, 300 mm. Lengths 1800, 2200, 2700 mm.
Installation
Can be installed on plywood, OSB, as well as directly on concrete subfloors, including ones with underfloor heating systems. We reccomend to install the flooring by gluing it to the subfloor.
Sanding
Our solid hardwood flooring is carefully sanded at factory, and there is no need for sanding after installation. Each board has tongue and groove across all four edges, as well as v-shaped bevels, allowing them to be connected seamlessly.
Finishing
Finishing can be done both at the factory, as well as after installation. If you prefer to have your flooring pre-finished at the factory, we offer hardwax treatment in various colors. in this case, your flooring is ready to be walked on right after installation.
Prices, Eur/m2, VAT excluded
Specie | Thickness, mm | Width, mm | Length, mm | Grading | ||||
Premium | Select | Living | Classic | Rustic | ||||
Oak | 12 | 165 | 600 - 1800 | 43.16 | 34.30 | 30.40 | 26.49 | 24.26 |
165 | 2200 / 2700 | 50.92 | 39.79 | 34.45 | 29.67 | 26.68 | ||
180 | 600 - 1800 | 45.70 | 36.32 | 32.71 | 28.05 | 25.69 | ||
180 | 2200 / 2700 | 53.93 | 42.13 | 36.40 | 31.41 | 28.26 | ||
16 | 210 | 600 - 2200 | 54.83 | 41.64 | 39.54 | 37.37 | 33.63 | |
210 | 2200 / 2700 | 64.70 | 48.30 | 45.09 | 41.85 | 36.99 | ||
240 | 600 - 2200 | 58.46 | 43.63 | 41.74 | 39.77 | 35.67 | ||
240 | 2200 / 2700 | 68.97 | 50.61 | 47.59 | 44.55 | 39.24 | ||
260 | 600 - 2200 | 62.07 | 45.63 | 43.93 | 42.15 | 37.73 | ||
260 | 2200 / 2700 | 73.24 | 52.93 | 50.07 | 47.21 | 41.50 | ||
300 | 1400 - 2200 | 67.17 | 48.70 | 47.04 | 45.34 | 40.97 | ||
300 | 2200 / 2700 | 85.05 | 59.97 | 56.85 | 53.73 | 47.43 | ||
Ash | 12 | 165 | 600 - 1800 | 31.03 | 26.98 | 23.30 | ||
2200 / 2700 | 37.40 | 32.85 | 26.87 | |||||
185 | 600 - 1800 | 32.74 | 28.04 | 24.53 | ||||
2200 / 2700 | 39.92 | 35.69 | 28.24 | |||||
210 | 600 - 1800 | 34.37 | 29.54 | 25.75 | ||||
2200 / 2700 | 42.44 | 38.66 | 29.59 |
Grading
The flooring boards are graded in five grades, depending on amount of knots and discoloration. However, there are no loose knots even in the lowest grades; all knots and cracks are filled with putty. The difference between grades is only visual, there are no differences in practical use.
Oak Premium Nearly no knots, separate pin knots ≤5mm in diameter allowed. Premium grade flooring is usually installed in exclusive luxury interiors. |
|
|
Oak Select Small sound knots ≤20mm in diameter, and cracks ≤40mm in length allowed. This is one of the most popular grades, a compromise between Premium grade and flooring with larger knots (Classic and Rustic grade). |
|
|
Oak Classic Substantial color and texture variations allowed, knots ≤75mm in diameter, cracks ≤6mm in width allowed. No sapwood allowed. |
|
|
Oak Rustic Substantial color and texture variations allowed, knots ≤75mm in diameter, cracks ≤6mm in width allowed. Sapwood allowed, but not more than 10% of surface. Rustic grade flooring shows the natural beauty of wood, each board has its own unique texture. |
|
|
Ash Premium No knots allowed. Ash Premium flooring is almost white, it creates feeling of lightness in the interior. |
|
|
Ash Select Sound knots ≤25mm in diameter allowed, natural color variations allowed. Most popular Ash flooring grade. |
|
|
Ash Rustic Knots ≤75mm in diameter and all color variations allowed. Rustic grade is the best choice if you prefer to see the natural texture of Ash wood. Each board has its own unique texture. |
|
Finishing
We offer hardwax treatment at the factory in various colors. We use high quality hardwax, produced by German company Glimtrex. Such flooring does not require any additional finishing after installation and is ready for being walked on. Hardwax provides high wear resistance and easy maintenance.
Prices for hardwax treatment (two layers), VAT excluded:
Clear hardwax: 6,00 eur/m2
Colored hardwax: 6,50 Eur/m2
15,00 eur fixed fee upon any hardwax order, regardless of volume.
Oak
![]() Antique |
![]() Clear |
![]() Clear White |
![]() Dark oak |
![]() Ebony |
![]() Graphite |
![]() Gray |
![]() Mahogany |
![]() Medium Oak |
![]() Polar White |
![]() Silver |
![]() Super White |
![]() Walnut |
![]() White |
Ash
![]() Antique |
![]() Clear |
![]() Clear White |
![]() Dark oak |
![]() Ebony |
![]() Graphite |
![]() Gray |
![]() Mahogany |
![]() Medium Oak |
![]() Polar White |
![]() Silver |
![]() Super White |
![]() Walnut |
![]() White |